• New Sliding Side Board System with both high and low positions, allowing a variety of positions for the side boards, without removing or changing the boards. Hustler IV Side Board System incorporates seat and/or light pockets for convenient placement of seats or lights.

  Hustler IV w/High Side Boards

  Hustler IV w/Low Side Boards

• Accommodates three types of steering modes: Conventional, Crab, and Round
• Built-in heater system for constant arm speed, even in cold weather conditions
• Hustler IV can be used with Rain House Cover
• Hustler IV has new 12" extensions for the built-in Tracking Bar for use while dolly is on track
• Works on both straight or curved track without auxiliary wheels
• Performance on track has been improved due to new track wheel design
• Works on standard 24 1/2" dolly track
• Greater payload, which enables the Hustler IV to carry many types of jib arms
• New Hydraulic system for smoother, more precise camera moves
• Arm is more rigid, due to improved bearing system
• Selectable, adjustable single, double or triple detent system on main valve control for responsive control of arm movement
• Improved stop valve system which allows even faster, smoother stops
• New built-in 4-way leveling head with built-in camera swing head with quick release locking system, ergonomically designed for use on the set
• New wheel design has dramatically reduced friction for smooth, rolling shots when pushing the dolly on a smooth floor surface
• All dolly deck controls are removable, allowing an even lower minimum deck height for transportation purposes or for using the Hustler IV chassis as a base, for use with a jib arm...allowing no interference for 360 degree pan shots
• Hustler IV has Many Accessories Available

• Three easily shifted steering modes (crab, conventional and round)
• Tight turning radius
• Mechanically compensated steering for accuracy
• Self-contained track system for use on Square Track
• Self-dampening hydraulic system
• Self-bleeding hydraulic system
• Charging system accepts 90-240v AC or DC to quickly charge the hydraulic system
• Self-centering hydraulic control knob or up/down lever with safety lock
• Manual hydraulic hand pump for use when electrical power is unavailable
• Lift beam position (cue) indicator
• Folding controls for transportation and storage
• Comfortable sliding seats with adjustable height
• Pneumatic Wheels
• Single-lever actuated four-wheel positive locking brake system
• Multi-Position Level Head with Mitchell mount and four leveling thumb screws
• Camera battery compartment
• Cable clips on lift beam for camera and battery cables
• Eight seat mount locations
• Removable Push Posts, also used as rear carry handles and manual pump handle
• Utility hooks on Push Posts
• Carpeted standing areas
• 500-pound (226.80 kg) lift capacity
• Seven lifts per system charge.

200-pound (90.72 kg) lift capacity

Boom height to 4’ 4” without risers.

Standard Accessories Include:

• 12” riser
• 24” offset
• low shot bracket
• 2 seats
• 2 high side boards
• 2 low side boards
• 2 low front boards
• 2 push handles
• 2 lifting handles

Pneumatic wheels are standard, but can quickly be swapped out for optional track wheels to run on straight (round-rail) track or easily put onto channel skateboard wheels for use on straight or curved track.