ADJ 3D Vision Plus
A hexagonal shaped LED panel with 3D visual effects.
ADJ 3D Vision Plus is a hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. It has a 4-Button menu system with a digital display with DMX onboard. It is designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. The Vision Plus is controllable via DMX using a DMX to RJ45 adapter. It can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking.
Panels lock together with an easy to use quick release panel lock. Dead hang installation is possible with the M10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe. The face of each ADJ 3D Vision Plus panel is covered with a frosted white acrylic panel which diffuses the light from the 72 3-in-1 RGB LEDs beneath. This creates an even spread of light within each of the three sections and gives the 3D vision a wide 180º viewing angle. Panels are used in isolation or linked together at any of their six sides. This means that large 3D-effect LED surfaces are created in unlimited shapes and configurations.
- 72 Pieces 3-in-1 RGB LEDs
- 3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control
- 3 DMX Channel Modes: 3, 9, and 13 Channel Mode
- Master/Slave Set Up
- PowerCON In/Out to daisy chain power